Upgrade Hit & Miss Gas Engine Stirling Engine Model Combustion Engine Collection

Description:
Item Name: Full Metal Hit & Miss Gas Engine
Color: Sliver
Material: Aluminium Alloy
Weight: About 2.2kg(Engine+Wooden Base)
Size Of Engine: 180*125*75mm(L*W*H)
Size Of Wooden Base: 180*66*50mm(L*W*H)
Cylinder Diameter: 22mm
Ltinerary: 20mm
Voltage: 3.5V
Fuel: Kerosene or Gasoline
The best tappet clearance: 0.5mm
Weight: 1610g
Revolutions Per minute:1200rmp

Engine Startup Steps:
1. Install three AA batteries, attach the fuel tank piep, and open the base to inspect the engine's wiring.
2. Add petrol (95#) to the fuel tank. Verify that the oil pipe is free of air once the filling is finished.
3. Turn the flying hammer position on the right side of the engine slowly and manually in an anticlockwise direction to obtain several turns.Its function is to enable the blended fuel to completely fill the cylinder.
4. To start the engine anticlockwise on the right side of the engine (installing the flying hammer position), flip on the power switch and spin the flywheel.

Precautions:
1. The carburettor needle most likely needs to be changed if the machine still won't start normally even with the ignition system functioning normally and the cylinder having normal compression.
2. Tighten the screw on the carburetor's top, then loosen it by 1/4 turn to turn on the flywheel. To get the gasonline to air ratio to reach the typical working mix ratio, repeat this process multiple times. 

Note:

Package Included:
1 X Upgrade Hit & Miss Gas Engine (With Base)