TWOLF TW-715 1:10 RC Off-road Vehicle Crawler 4WD Four-door Pickup Truck with V8 Engine (No Electronic Equipment) - KIT Version

Features:

The four-door pickup vehicle is electrochemically colored and has a stunning appearance.

The wear resistance and strength are significantly increased using all-metal CNC machining, magnesium aluminum alloy + 7075 aluminum alloy + titanium alloy, and 7075 aluminum alloy hard-oxidized axles.

With the skylight's simulated skylight design, you can see the interior's fine elements up close.

The V8 engine's simulated piston motion architecture makes it possible to display motor power precisely.

The tie rod is made of an all-titanium alloy, enabling the vehicle to support up to 100 kg of load.

With the KIT version and its hundreds of CNC parts, you may begin a fantastic car assembly project and experience unparalleled difficulty and challenge.

The car is built with robust playability and full functionality. It offers an entirely different driving control experience, whether you use the off-road or climbing modes.

It is also a gorgeously adorned car model that is appropriate for collection at the same time.

This automobile has no electronics, so you will have to get everything ready on your own. Please don't hesitate to contact us with any questions.

Note: You must put it together on your own for those over 14.

Specifications:

.Color: As Shown
.Material: Alloy
.Brand: TWOLF
.Scale: 1:10
.Assembly Type: KIT (excluding electronic equipment)
.Weight: 5.85kg (excluding OP and electronic equipment lamp set)
.Wheelbase: 332mm
.Ground Clearance: 75mm (minimum distance)
.Approach Angle: 49.5°
.Departure Angle: 35°
.Wheel: 2.2 inches
.Tires: 115mm in diameter and 35mm in thickness
.Adapt to Road Surface: Stone road, hard soil road, paved road
.Gearbox: 1 N 2 (low gear, high gear, neutral gear)
.Broken Transmission: Front axle broken transmission (rear axle power output)
.Differential Speed: Synchronous differential speed of front and rear axles
.Drive Mode: Electric drive
.Four-wheel Drive Mode: Time-sharing four-wheel drive
.Chassis structure: straight bridge 8 link
.Front and Rear Axles: Independent straight axles, support differential lock
.Motor: 540 brushed motor is recommended (the length should not exceed 60mm)
.ESC: HW 1080 waterproof ESC is recommended
.Gear Steering Gear: 9g steering gear is recommended x 1
.Transmission Servo: 9g servo is recommended x 1
.Steering Wheel Electronic Steering Servo: 9g servo is recommended*1
.Front Steering Steering Gear: Recommended standard steering gear*1 (about 50KG)
.Differential Lock Servo: Recommended standard servo x 1 (about 20KG)
.Engine Type: V8 piston motion simulation engine
.Linkage Mode: Geared motor synchronous wheel linkage
.Remote Controller: 6CH and above remote control is recommended
.Car Battery: 11.1V 3S lithium battery is recommended
.Product Dimensions: 53.78 x 24.25 x 25.9cm
.Product Weight: 5850g
.Package Dimensions: 63 x 38 x 22.3cm
.Package Weight: 7000g
.Packing: Carton Box

Package Content:

.1Set x DIY Assembly Car Kit
.1 x User Manual