Three Wheeler Scale Horizontal Engine Model R18 Single Cylinder Four-stroke 1.9CC

Features:

.Simulation Tricycle or three-wheeled vehicle powertrain: The attractiveness of this engine, which is based on the first vehicle engine prototype, is highlighted by the horizontal cylinders and a sizable flywheel. This model has the advantage of an ingenious structural design where each part replicates the mechanical principles. It is a fully working, start-and-run model with an all-metal engine.

Excellent Manufacturing: Every component of the engine is painstakingly manufactured and is built entirely of precision casting. The most important aspect of the first car engine is the smart contour of the cylinder block and other casting process components. You'll experience the mechanical operation of the engine's special beauty.Initial Steps:

1. Inspect and connect the engine wiring to the fuel tank pipe on the wooden base. Install three AA batteries (4.5 V) after that.

2. After adding 95# of gasoline to the fuel tank, turn the flywheel on the right side of the engine (near the power switch) several times clockwise to ensure that all of the mixed fuel enters the cylinder. Verify that the fuel pipe is clear of air.

3. After turning on the power switch, swiftly turn the flywheel clockwise to start the engine. The flywheel is located on the surface of the power switch.

.1. In the ignition device, you must adjust the carburetor needle if the machine does not start with the regular cylinder compression.

2. To make sure the mixture of gasoline and air returns to normal, tighten the primary needle on the carburetor, loosen the one-quarter cycle, and turn the flywheel.

3. Switch off the power once the machine has finished operating.A Superb Model Gift: This incredible mechanical creation allows you to take in the charm of the working simulation tricycle vehicle engine. Ideal for personal use or as a luxurious Christmas present for friends, family, or model lovers.

Specifications:

.Material: Brass/Stainless Steel/Bamboo
.Item No.: R18
.Displacement: 1.9CC
.Cylinder Diameter: 1.3cm
.Stroke: 1.8cm
.Flywheel Diameter: 10cm
.Voltage of the Ignition Device: 4.5V(3*AA Batteries, not included)
.Starting Method: External Wheel or Manual Pull
.Product Weight: 1200g
.Product Dimensions: 15 x 11 x 10cm
.Package Dimensions: 20 x 20 x 20cm
.Package Weight: 1400g
.Packing: Box
.Ages: 14+