Technical Parameters: This tester draws electricity from the sensor interface end of the (Recxl) igniter. (The voltage is kept to 5.5 volts.)

5 volts; 54 x 40 x 24 mm in size

The single-function electronic igniter simulation tester, driven by science and technology, cannot satisfy user needs. Consequently, the CDI TESTER tester was created.

The tester is easy to use and has a straightforward design. It is an essential tool for those who play with model aircraft because of its small size and portability.

This test consists of a CPU with an advanced Harvard structure and a 10-bit ADC. By pressing the SELECT button, you can test electronic igniters that are single, double, V-shaped, 3W (dual magnet), and star-shaped multi-cylinder (3, 5, 7, 9) in shape.

Panel: There is not much to the tester panel. There is simply one RPM knob and two buttons: SELECT and RESER. Six status indicators: N, S, MULTI, 3W, V, S/TWIM, and N. The two igniters' respective signal sensor interfaces.

Simple to use: place the Recxl igniter's sensor wiring into the appropriate socket (the single and double-cylinder igniters go into the 3-hole socket, and the other igniters go into the 4-hole socket). When you press the SELECT button, the indicator light will turn on in the matching indicator position (for a dual-cylinder igniter, for instance, the S/TWIN indicator light will turn on). To alter the igniter's frequency of ignition, turn the RPM knob.

For Individuals Over the Age of 14