HSP 94166 RC Car 1/10 Scale 4WD Nitro Gas Powered Off-Road Buggy Truck Vehicle

A fully completed and operational 1/10 scale shaft driven 4WD off-road nitro buggy, the HSP-94166 is ready to go.

With its top speed of 100 kph, this new two-speed automatic gearbox offers tremendous acceleration.

The 18CXP pull start nitro engine in this model is robust, dependable, and extremely powerful.

Main Features:
-Two Speed Transmission
-4 Wheel Drive System with 18CXP Engine
-Front and Rear Leak Proof Differential with Metal Bevel Gears
-2.5mm 6061/T6 Anodized Aluminum Chassis
-Lightweight Aluminum Flywheel (13.8g) provides quick engine response.
-Sealed Battery and Receiver Box
-Fully ball Raced
-Powerful Disk Brake System with replaceable pads
-75cc Leak Proof Fuel Tank with Overflow pipe and spring loaded fill cover
-Four adjustable Oil filled aluminum capped shock absorbers
-Differentials with 5 screws providing quick maintenance
-High flow dual element air filter
-High Performance Off Road Knobbly Tyres
-High Quality power silencer and regulated fuel tank vent
-Pivot Ball Suspension
-Fully upgradeable with aluminum parts

Specifications:
-Wheelbase: 275mm
-Gear Ratio: 1:5.84(L)1:8.58(H)
-Ground Clearance: 26mm
-Engine: 18cxp
-Radio System: 2CH 2.4G
-Chassis Type: 2.5mm aluminum 6061
-Wheels: 86*32(F) 86*40mm(R)
-Shocks: 4 Oil filled aluminum capped speed control

What's in the box:
-1x 1/10 Scale Buggy
-1x 2.4G Transmitter
-1x Manual

What you'll need:
-Glow plug igniter
-Nitro fuel 16% or 20%
-8 x AA Batteries

Nitro Gas RC Car Starting Attention:
-Glow: Make sure the glow plug is in good shape and that the igniter is charged. Make sure the glow plug you're using will last for at least ten seconds.
-Pull starter: Since the pull starter is an easily worn item, please pull the start cord correctly when starting for the first time.
-Novice: We advise first-time Nitro Gas RC car owners to get assistance from our customer service agent for setup and operation.