M12B 2.6cc Mini Water Cooled 4 Stroke Gas Engine ICE Engine Model Upgrade

Shipping Notice:

Features:

.Brass and stainless steel were used to build this little gasoline engine. It features a distinct form and a cooling system that uses water. The building is solid and trustworthy. It has a wooden foundation that makes placement and use simple. You will adore this excellent model of a four-stroke single-cylinder minicar.

.Engine Starting Steps:

(1) Install the AA battery (4.5V), connect the fuel tank oil pipe, and check the engine wiring from the wooden foundation;

(2) After adding 95# of gasoline to the fuel tank, attach the flywheel to the engine. The power switch's surface on the right rotates repeatedly in a clockwise direction without producing any air;

(3) To start the engine, turn the flywheel quickly in the clockwise direction on the right side of the engine (the surface of the power switch).Note:

(1) The carburetor oil needle may need to be adjusted if the ignition device is normal and the cylinder compression is normal but the machine still cannot start normally;

(2) To make the mixture of gasoline and air approach the standard functioning mixing ratio, loosen 1/4 Circle after tightening the main oil needle on the carburetor.

(3) Disconnect the power switch once the machine stops operating.

.Value:

This superb engine model is simple to use, and it may be used as a desktop toy, as part of a collection of designer models, or as a great personalized present for model enthusiasts.

.For Ages: 14+

Specifications:

.Color: As Shown
.Material: Brass + Stainless Steel + Wood
.Engine Size: 150 x 120 x 127mm
.Wooden Base Size: 150 x 120 x 30mm
.Displacement: 2.6cc
.Bore: 13mm
.Stroke: 12mm
.Use adjustable speed carburetor, matching ignition device
.Start Mode: External force (electric drill) or manual start
Fuel: 95# gasoline
.Product Dimensions: 15 x 12 x 12.7cm
.Product Weight: 1400g
.Package Dimensions: 20 x 20 x 15cm
.Package Weight: 1750g
.Packing: Box

Package Content:

.1 x Engine Model
.1 x Hand Puller
.1 x User Manual