.This miniature engine is based on Bob Shores' Silver Angel design, which has been scaled back and tweaked. It has a flying ball speed limit mechanism and an air-cooled cooling structure. Brass and stainless steel are skillfully fashioned into the engine, which has a wooden base for simple installation and use. This vintage petrol engine model will appeal to you.
.Well-manufactured:

The engine has a one-of-a-kind and elegant shape, a sturdy and reliable structural design, is made with high-quality materials and has stable performance. This desktop model engine is quite distinctive, easy to use, and enjoyable. You'll like the mechanical working of the engine's special charm.

.Engine startup steps:

(1) Install 3 AA batteries (4.5V), connect the fuel tank oil pipe, and check the engine wiring from the wooden base;

(2) Put 95# petrol in the fuel tank. In order to ensure that there is no air in the fuel line, the flywheel, which is located on the right side of the engine (the surface of the power switch), repeatedly rotates clockwise;

(3) Switch on the power, then swiftly rotate the flywheel anticlockwise to shut off the engine. On the right side (the surface of the power switch), start the engine.

.Note:

(1) The carburetor oil needle needs to be adjusted if the ignition device and cylinder concentration are both normal but the machine still cannot start normally;

(2) To get the gasoline and air mixture to approach the typical working mixing ratio, start the flywheel after adjusting the carburetor's main oil needle by 1/4 turn;

(3) Disconnect the power switch once the machine stops operating.

.Best model gift:

to experience the allure of the magnificent mechanical craft's working engine. a fantastic gift for friends and family, a birthday present, or a holiday treat for yourself.

Suitable age: 14 years old and up

Specifications:
.Color: As Shown
.Material: Brass + Stainless Steel + Wood
.Overall size: 150*120*135mm;
.engine size: 85*70*105mm;
.wooden base size: 150*120*30mm;
.weight: 1000g;
.displacement: 1.6CC;
.cylinder diameter: 13mm;
.stroke: 12mm;
.flywheel diameter: 56mm
.Product Dimensions: 15 x 12 x 13.5cm
.Product Weight: 1000g
.Package Dimensions: 20 x 20 x 20cm
.Package Weight: 1300g
.Packing: Box

Package Content:

.1 x Engine
.1 x Hand Puller
.1 x Manual