M12B-P 1.6cc Single Cylinder 4 Stroke Gasoline Watercooled Engine Model with Gear Reducer

Features:

.This tiny single-cylinder, four-stroke engine has an adjustable speed carburetor and a water-cooled heat dissipation system.

The one-of-a-kind and gorgeous engine model is constructed of brass and stainless steel, with an even more distinctive reduction gear box. For simple positioning and use, the engine is permanently fastened to a hardwood foundation.

.Engine Start Steps:

1. Install 1.5V AA batteries, connect the fuel tank tubing, and check the engine wiring from the wooden base;

2. Add 95# gasoline or zippo kerosene to the fuel tank. To check sure there is no air in the fuel line, after the filling is finished, position the flywheel on the right side of the engine (the surface of the power switch) and revolve it repeatedly counterclockwise;

3. After swiftly rotating the flywheel clockwise to the right (power switch surface), turn on the power switch. Then, start the engine.

.Notes:

1. If the ignition device and cylinder compression are normal but the machine still cannot start normally, the carburetor oil needle needs to be adjusted;

2. To make the mixture of gasoline and air reach the regular functioning mixing ratio, loosen 1/ 4 laps after tightening the main oil needle on the carburetor and start the engine;

3. Switch off the power once the machine has finished operating.Wonderful Gift: This excellent engine model doubles as a model for collections in addition to being a desktop ornament. It is a wonderful personalized present for those who enjoy mechanical model crafts.

.If you have any questions about the product or usage problems, please contact us in time, and we will try our best to solve it for you.

.Age: 14+

Specifications:

.Color: As Shown
.Material: Brass + Stainless Steel + Wood
.Engine Size: 95 x 85 x 97mm
.Wooden Base Size: 200 x 120 x 30mm
.Displacement: 1.6CC
.Cylinder Diameter /bore: 13mm
.Stroke: 12mm
.Flywheel Diameter: 56mm
.Ignition Device Power Supply Voltage: AA batteries (not included)
.Starting Method: External force (electric drill) or hand pull start
.Fuel: Gasoline or zippo kerosene
.Product Dimensions: 20 x 12 x 12.7cm
.Product Weight: 1254g
.Package Dimensions: 25 x 25 x 25cm
.Package Weight: 1700g
.Packing: Box

Package Content:

.1 x Engine
.1 x Hand Puller
.1 x Manual