Hit & Miss Gas Model Engine with Wooden Base Fuel Tank Water Cooled ICE Engine

Features:

.The Hit and Miss engine model utilizes an antiquated water-cooled design. It has been set up on the base, making it easy to use and move around. The model is ready to run with a fuel tank and pipeline. When it is employed, it will be appreciated more.

.Starting Step:

1. Install the battery, check the engine wiring, and connect the oil tank and pipeline (ignition voltage: 6-7.4V).

2. 95# of fuel should be put in the tank. When fixing the gasoline tank, make sure the fuel pipe's minimum oil level is not lower than the carburetor's.

3. Verify the model's screws for looseness and the throttle's position. After checking, fill the tank with cold water by roughly 3/4.

4. Switch on the power, then spin the flywheel. On the right side of the engine, turn the key counterclockwise to start. 

.Note:

1. If air is in the pipeline, squeeze it to fill it with fuel.

2. Do not apply too much pressure to the accelerator before starting. Adjust the accelerator appropriately to ensure that the model runs smoothly after beginning.

3. If the start is not smooth, add a couple of drops of oil to the carburetor and set the accelerator correctly.

.Applicable Scope:

This model of an advanced internal combustion engine is easy to use and inspires feelings of immersive delight. Its retro appearance makes it excellent for model collectors and a great holiday present.

Age: 14+

Specifications:

.Material: Metal

.Product Weight: 1500g

.Package Dimensions: 23 x 16 x 13cm

.Package Weight: 2000g

.Packing: Carton Box