KACIO LS2-14 Two Cylinders Reciprocating Retro Steam Engine Model for 80cm+ Boat Ship (without Boiler)

Features:

Before the development of the gasoline-powered engine, mechanical transportation was powered by steam. To help pump water out of coal mines, the British inventor Thomas Savery created the first steam pump, known as "water by fire," in 1698—the first attempts to harness steam for applicable uses date from the 17th century.

Simulations: The steam engine's "ka zi, ka zi" sound is where the brand name KACIO came from. The Renaissance steam engine served as inspiration for the design. By casting and electro-coating it, the black and brass colors make it more enduring traditional and lifelike.  Additionally, we created an integrated crankshaft specifically for stable performance. Additionally, our designer decided to employ small hexagonal screws, chocks, and an outstanding lubrication system (note: special tools are required for unscrewing). The SUS304 flywheel was electrophoresed into a traditional red color.  (After the chocks are taken off, the spindle's height can be decreased)

The process of precision casting. The engine is made up of precisely cast form pieces that have all been verified for reliability in service and have good surface finishes and dimensional accuracy. Treatment with surface electrophoresis lasts for a very long time. The surface electrophoresis will maintain its original brilliance and brightness over time and won't quickly fade or tarnish. High-hardness beryllium copper, which is friction-resistant and ensures long-term operation, is used to make the spindle sleeve.

The CNC integrated crankshaft. The steam engine's primary structural support comes from the crankshaft. The integrated crankshaft for this model steam engine is finally machined after 300 trials, offering good stability, strength, and high concentricity.  A Cup for Adjustable Oil:

Brass oil cup with a 1/4-40 or M6*0.5 connecting thread. On these oilers, the knob controls how much oil is used. The through hole has a diameter of 1.2 mm. The viscosity of the oil affects how quickly the flow moves. The oil cup has a drain at the bottom. And each friction surface has its own set of lubricating apertures. A fluorine rubber ring resistant to corrosion and high temperatures covers every joint surface.

Suitable for Steam Boats Up to 80cm in Length: The steam engine is the most excellent form of propulsion for model ships up to 80cm in length. Both positive and negative rotations are supported. Due to its big cylinder diameter and high stroke, it can produce much more power. To ensure maximum power, an efficient boiler combination is advised. (Note that the boiler is excluded. You can purchase it and speak with us about a complementary boiler.)

Perfect Gift Option: Because of its excellent mechanical handcraft and value as a collectible, it makes the ideal surprise present for fans of steamboat engine models. It will be regarded as a treasure by those who get it.

.For over 14 years

Note:

1. To avoid rust, every steam engine will be coated with anti-rust oil before leaving the plant. Sweaty hands can quickly cause it to rust if it is not sprayed with anti-rust oil.

2. Please be aware that no boiler can sustain continuous operation. The video's air pressure is 0.8 MPA. We do not advise running for an extended period of time below 0.8MPA since friction surface deterioration is unavoidable. We have strengthened the primary connection points and created a plug-in structure, so after connecting the boiler (the pressure is 0.2-0.4MPA), as long as the lubrication is in place, there is no need to worry about long-term operation.

3. The cylinder is lubricated by the main oil cup. To increase the machine's service life, please lubricate each joint before using.

.For over 14 years


Specifications:

.Color: As Shown
.Material: Copper
.Model: LS2-14
.Cylinder Diameter: 14.0mm
.Stroke: 15.0mm
.Spindle Diameter: 5.0mm
.Ground Clearance of Spindle Center: 19.0mm
.Operating Pressure: 0.1Mpa - 0.8Mpa
.Air Pressure Recommended: 0.4Mpa - 0.6Mpa

.Intake Connection Thread: M6-0.5 1/4-40
.Flywheel diameter: 49mm
.The base is 58mm wide, 87mm long and 110mm high
.Product Size: 8.7 x 5.8 x 11cm
.Product Weight: 1200g
.Package Dimensions: 10 x 8 x 15cm
.Package Weight: 1500g
.Packing: Box

Package Content:

.1Set x Steam Engine Model