ENJOMOR 6cc Antique Red Hit and Miss Gas Engine Working Model
Description:
A hit-and-miss engine is a four-stroke IC engine type that has existed since the late 1800s and gained popularity during the 1890s and 1930s. The method of speed control used on these engines (as opposed to the "throttle-governed" form of speed control) gives rise to the term. When the engine is running, it makes the recognizable "POP whoosh whoosh whoosh POP" sound when it fires, coasts, and then fires again to maintain its average speed as needed.
Product name: All-metal internal combustion engine
Weight: about 2kg
Material: aluminum alloy
Voltage: 4.2~6V
Fuel: ZIPPOOIL or gasoline
The best tappet clearance: 0.5mm
Engine parameters
Size: 170*125*112mm
Displacement: 6CC.
Cylinder diameter: 120MM
Itinerary: 20MM.
Weight: 1410G
piston ring: rubber
Age: children over ten years old
Included packaging:
1 x Engine(Spark Plug Included)
1 x CDI Igniter
1 x Battery Box
1 x Mini Fuel Tank
1 x Fuel Tube
1 x User Manual
Note: Throttle regulator and ignition timing switch,
The engine has been adjusted before shipment; beginners should not move
Engine start steps:
To prepare the engine for starting, follow these steps:
- Gather 3 AA 1.5v batteries.
- Check the engine wiring to ensure all connections are secure.
- Connect the fuel tank tube to the engine.
- Connect the battery box to the engine.
- Fill the fuel tank with gasoline (95#). Ensure there is no air in the tubing after filling.
- Rotate the engine flywheel clockwise by hand to allow the mixed gasoline to enter completely.
- Check for a spark while rotating the flywheel and ensure the cylinder is in a normal compression state. If there is a spark, you can proceed to start the engine.
To adjust the ignition timing, follow these steps:
- Check that the piston connecting rod is at the leftmost horizontal position (as shown in Figure 1).
- Check the ignition switch's and brass's closing condition (Figure 2).
- Once both conditions are met, turn the flywheel and observe if the connecting rod moves to the leftmost position within 0.2 seconds and if there is a spark. If everything checks out, you can start the engine.
- Stock: In Stock
- Model: 10139
- SKU: enjomor-6cc-antique-red-hit-and-miss-gas-engine-working-model