H76 5CC Horizontal Vintage Stationary Engine Twin-cylinder OHV Dual Flywheel Gasoline Internal Combustion Engine Model

Features:

.Vintage Engine: This vintage-looking horizontal twin-cylinder gasoline engine runs at a constant speed. uses a water pump and a water-cycle cooling system. It is powered by three AA batteries at 4.5 volts and has the newest electronic distributor ignition system.
.This flawless mechanical workmanship engine model, constructed from brass and stainless steel, is fully assembled, set on a wooden platform, and ready to go at any moment. You can feel the distinct attractiveness of a mechanical engine operating system and be astounded by its exceptional functioning condition by just adding fuel to operate it properly.
.Steps to Start the Engine:
(1) Install three AA batteries (4.5V), connect the fuel tank oil pipe, and inspect the engine wiring from the wooden foundation;
(2) 95# gasoline should be added to the fuel tank. On the right side of the engine, the flywheel (the surface of the power switch) rotates in a clockwise manner several times. By doing this, the blended gasoline will fill the cylinder to the fullest and the fuel pipe will be free of air;

(3) Activate the power switch, then swiftly rotate the flywheel in a clockwise direction. On the right side, where the power switch is located, turn on the engine.
.Notes:
(1) As long as the engine is running, fill the water tank with water. Because when the engine is running, water enters the cylinder to fill the area before returning through the hose to the water tank.
(2) In the event that the machine fails to start normally with standard ignition and cylinder compression, the carburetor oil needle may require adjustment.
(3) Once the carburetor's primary oil needle has been tightened, release the 1/4 circle and turn on the flywheel to bring the gasoline and air mixing ratio up to the standard operating range;
(4) When the machine stops running, turn off the power switch.
.Superb Model & Gift: This exquisite mechanical craft lets you experience the engine's allure while it operates. It's a great addition to any collection and makes a luxurious Christmas or birthday present for model and mechanical enthusiasts.

Specifications:

.Material: Brass/Stainless Steel/Bamboo
.Item No: H76
.Overall Dimensions: 200*130*140mm
.Wooden Base Dimensions: 200*120*30mm
.Displacement: 5CC
.Cylinder Diameter: 13mm
.Stroke: 12mm
.Supply Voltage of Ignition: 4.5V (3*AA Batteries, Not Included)
.Starting Mode: Manual/Electronic Drill Starting
.Product Dimensions: 18 x 13 x 11cm
.Product Weight: 2400g
.Package Dimensions: 25 x 25 x 25cm
.Package Weight: 2800g
.Packing: Box
.Ages: 14+