1:10 Model Car Engine Gearbox with Pulley Rack and Screw Glue for Toyan FS-S100 FS-S100G FS-S100（W）FS-S100G(W)

Features:

Universal accessories for 1:10 scale cars, as well as modified Toyota FS-S100, FS-S100G, FS-S100 (W) / FS-S100G (W), are available. However, in order to use a modified gearbox, the original gear clutch and wheel clutch need to be removed.

For the product to be utilized with the gearbox, a pulley clutch is required. In the store, the pulley clutch is available for separate purchase.

The product's purpose is to provide the engine the ability to operate in forward, reverse, and neutral, giving the automobile and ship models the same capabilities as the actual vehicles and vessels.

The entire thing is constructed of metal, with a speed ratio of 2.3 to 2.4, a clutch mechanism, a lever control, two 5 mm-diameter shafts for the input and output, and a pinion input gear output.

Dimensions: Total shaft length measuring 70 mm, total rod length measuring 86 mm, and width measuring 40 mm

The item is not a unique accessory. It must be adjusted in accordance with the engine and frame. There are no standard installation guidelines. The level of practical ability needed is quite high. There is no particular technical help offered.

Appropriate for adults over the age of fifteen

Specifications:

.Color: As Shown
.Material: Metal
.Product Weight: 250g
.Package Dimensions: 13 x 8 x 9cm
.Package Weight: 300g
.Packing: Bag

Package Content:

.1 x Model Car Engine Gearbox with Pulley Rack and Screw Glue